Description
KINGSTON KVR16LS11/4
KVR16LS11/4
4GB 1Rx8 512M x 64-Bit PC3L-12800 CL11 204-Pin SODIMM
ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
204-pin SODIMM uses gold contact fingers.
Features
• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 1.18” (30mm), double sided component
Tech Specs
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: SODIMM DDR3
- Size: 1 x 4GB
- #Hide#Individual Module Size: 4GB
- Speed: 1600 MHz
- Compliance: PC3L-12800
- Pins: 204-pin
- CAS Latency: CL11
- Data Integrity Check: Non-ECC
- Low Voltage: Yes
- Voltage: 1.35V
- Additional Information: Unbuffered
- Package Type: Blister Pack
- Package Weight: 0.0690 kg
- Warranty: Lifetime
Reviews
There are no reviews yet.