Spire Dynamode ADSL Splitter (Microfilter), Tailed

£3.02 (inc VAT)

Spire Dynamode ADSL Splitter (Microfilter), Tailed

Out of stock

SKU: ETADSLSPLIT-TAIL Category:

Description

SPIRE M-ADSL-FILTER-T

Microfilter & Splitter for ADSL Lines (Tailed)
 
The Dynamode M-ADSL-FILTER-T is a full UK standard spec ADSL Microfilter for BT exchanges within the UK.
 
Featuring high-performance circuits to keep telephone conversations at high quality and at the same time maintain optimum ADSL line speeds all the way up to ADSL2 8 Mbps specifications.
 
 
DC Characteristics
All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective, the DC resistance should exceed 10 MW. 
 
 
 
Typical Applications Include
 ADSL –Wireless LAN Router
 ADSL –Wireless Access Point
 ADSL –Wireless Bridge

Tech Specs

Description

Specification

  • Type: ADSL Splitter
  • Length: N/A
  • Connector(s): “RJ45
    Console Port, RS-23″
  • Colour: White
  • Package Weight: 0.0400 kg
  • Warranty: 1 Year

Additional information

Weight 0.0400 kg
MPN

Brand

EAN

Reviews

There are no reviews yet.

Be the first to review “Spire Dynamode ADSL Splitter (Microfilter), Tailed”

Your email address will not be published. Required fields are marked *